Companion Quick Start Guide

+ More

Table of Contents

Start Here Quick Start Guide No tools. No stress. Just temperature-controlled sleep. What's in the Box 1. Hydrolayer 2. Water Hose 8 ft | 2.4 m 3. Dock 4. Remote Before You Begin You’ll Need Get Ready We love pets, but keep them away during setup. Strip your bed down to the mattress. Choose a spot for your Dock. 1. Setup Your Chilipad Cover You’ll Need Unzip the Chilipad Cover on the side where you’ll place the new Hydrolayer. 2. Attach Your Hydrolayer You’ll Need Set the Hydrolayer on the bottom layer and secure all 4 S-Hooks. Slide the water hose through the opening behind the Chilipad tag and attach it to the Hydrolayer. Zip the top and bottom layers together. 3. Setting Up Your Dock You’ll Need Plug the power cord into the Dock and then into a wall outlet or surge protector. Press the power button to turn on and add one packet of System Cleaner to the reservoir. Add distilled water to the Dock’s reservoir until the screen displays the Chilipad is full. Download the Sleepme app to unlock scheduling and more. 4. Setup Your Remote You’ll Need Choose a spot on your nightstand for the Remote. Plug the power cord into the Remote and then into an outlet. Optional: Use your USB-C accessory port to charge your phone or another accessory. Time to make your bed and own the night!

Adding a second zone? Let’s get both sides of your bed dialed in for personalized comfort 🔥❄️

Start Here

Quick Start Guide

No tools. No stress. Just temperature-controlled sleep.

What's in the Box

 

1. Hydrolayer 

  • 1 Hydrolayer
  • 4 S-Hooks

2. Water Hose 8 ft | 2.4 m

3. Dock

  • 1 Dock
  • 1 Power Cord 6ft. | 1.8 m
  • 1 System Cleaner
  • 1 Drain Key*

4. Remote

  • 1 Remote
  • 1 USB-C Cable
  • 1 USB-C Charger

*For draining water from the Dock and Hydrolayer

Before You Begin

You’ll Need

Distilled water   Wi-Fi name and password  

1 Gallon (3.8 L) 

per Dock
Needed for sleep programs.
You can switch to Airplane
Mode after setup if you prefer
no Wi-Fi in the bedroom. 2.4 GHz

Get Ready

We love pets, but keep them away during setup.

Pet nails can damage the Hydrolayer unless it’s safely
covered by the top layer.

Strip your bed down to the mattress.

If you have a mattress protector, you can use it —
but the Chilipad Cover already acts as one.

Choose a spot for your Dock.

Pick a place near a power outlet with open space around the front and back grilles. Common spots include under the bed (at the head or foot) or inside a nightstand with airflow. Just make sure it’s in an easy-to-reach spot for quick water refills.
A surge protector is recommended.
        Note: For adjustable beds
we recommend the foot
of the bed.
 
 
Inside Nightstand or Under Head of Bed or Under Foot of Bed

 

1. Setup Your Chilipad Cover

You’ll Need

Chilipad Cover

Unzip the Chilipad Cover on the side where you’ll place the new Hydrolayer.

 

 

2. Attach Your Hydrolayer

You’ll Need

Hydrolayer 4 S-Hooks Water Hose

Set the Hydrolayer on the bottom layer and secure all 4 S-Hooks.
 

Note: The ladders are here

 to adjust based on 

your mattress
height.

Slide the water hose through the opening behind the Chilipad tag and attach it to the Hydrolayer.
   

Zip the top and bottom layers together.
   

 

3. Setting Up Your Dock

You’ll Need

Dock and Power Cord System Cleaner Distilled Waller

Plug the power cord into the Dock and then into a wall outlet or surge protector.
Connect the water
hose to the Dock.

Press the power button to turn on and add one packet of System Cleaner to the reservoir.
   

 

Add distilled water to the Dock’s reservoir until the screen displays the Chilipad is full.
   

 

 

Download the Sleepme app to unlock scheduling and more.

4. Setup Your Remote

You’ll Need

Remote USB-C Cable USB-C Charger

Choose a spot on your nightstand for the Remote.

Angle the Remote to your bed to automatically turn your Chilipad on or off. See Remote settings to learn more.

Plug the power cord into the Remote and then into an outlet.

The Remote will pair with your Dock automatically

Optional: Use your USB-C accessory port to charge your phone or another accessory.

Time to make your bed and own the night!

 

companion second zone 2.0 setup

Related Articles