TwinXL Quick Start Guide
Table of Contents
Setting up your Chilipad 2.0 on a split adjustable or Twin XL bed? This step-by-step guide will walk you through everything you need for a perfect fit and optimal performance.
Start Here
Quick Start Guide
No tools. No stress. Just temperature-controlled sleep.
What's in the Box
1.Chilipad Cover
- Top and Bottom Layer
2. Hydrolayer
- 1 Hydrolayer
- 4 S-Hooks
3. Water Hose (8 ft.)
4. Dock
- 1 Dock
- 1 Power Cord (6ft.)
- 1 System Cleaner
- 1 Drain Key*
5. Remote
- 1 Remote
- 1 USB-C Cable
- 1 USB-C Charger
*For draining water from the Dock and Hydrolayer
Before You Begin
You’ll Need
| Distilled water | Wi-Fi name and password | ||
 |
1 gallon per Dock |
 2.4 GHz |
Needed for sleep programs. You can switch to Airplane Mode after setup if you prefer no Wi-Fi in the bedroom. |
Get Ready
 |
We love pets, but keep them away during setup.Pet nails can damage the Hydrolayer unless it’s safely |
 |
Strip your bed down to the mattress.If you have a mattress protector, you can use it — but the Chilipad Cover already acts as one. |
 |
Choose a spot for your Dock.Pick a place near a power outlet with open space around the front and back grilles. Common spots include under the bed |
|
Note: For adjustable beds we recommend the foot of the bed. |
||||
 |
 |
 |
||
| Inside Nightstand | or | Under Head of Bed | or | Under Foot of Bed |
1. Setup Your Chilipad Cover
You’ll Need
| Chilipad Cover |
 |
|
For each corner, hold the cover and anchor band together, then stretch them over your mattress like a fitted sheet. |
|
| Pull the anchor bands underneath all four corners. |
 |
|
|
|
Once it’s in place, unzip one side of the top layer to expose the bottom layer. |
|
 |
||
2. Attach Your Hydrolayer
You’ll Need
| Hydrolayer | 4 S-Hooks | Water Hose |
 |
 |
 |
|
Set the Hydrolayer on the bottom A layer and secure all 4 S-Hooks. |
|
| Use the ladders to adjust for your mattress height. Aim for snug, with no shifting or bunching. |
 |
|
|
Slide the water hose through the opening behind the Chilipad tag and attach it to the Hydrolayer. |
|
|
 |
For split adjustable beds connect the hose to the Hydrolayer — skipping the normal water hose opening.  |
|
|
Zip the top and bottom layers together. |
|
 |
||
3. Setting Up Your Dock
You’ll Need
| Dock and Power Cord | System Cleaner | Distilled Waller |
 |
 |
 |
|
Plug the power cord into the Dock and then into a wall outlet or surge protector. |
|
|
Connect the water |
 |
|
Press the power button to turn on and add one packet of System Cleaner to the reservoir. |
|
|
||
 |
Add distilled water to the Dock’s reservoir until the screen displays the Hydrolayer is full. |
|
 |
||
|
|
Download the Sleepme app to unlock scheduling and more. |
|
4. Setup Your Remote
You’ll Need
| Remote | USB-C Cable | USB-C Charger |
 |
 |
 |
|
Choose a spot on your nightstand for the Remote.Angle the Remote to your bed to automatically turn your Chilipad on or off. See Remote settings to learn more. |
 | |
|
Plug the power cord into the Remote and then into an outlet.The Remote will pair with your Dock automatically |
 | |
|
Optional: Use your USB-C accessory port to charge your phone or another accessory. |
Time to make your bed and own the night!
