If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Contact Support
  • Home
  • Chilipad Dock Pro
  • Setup and Maintenance

Sleep System Monthly Maintenance

Maintenance schedule for the Chilipad Dock Pro Sleep System to keep your sleep system running smoothly and efficiently.

Written by Denver Dublada

Updated at April 17th, 2025

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Chilipad Dock Pro
    Setup and Maintenance Troubleshooting Frequently Asked Questions Repair Guides
  • Sleepme Mobile App
    Setup and Installation Frequently Asked Questions Troubleshooting Hiber-AI
  • Sleep Tracker
    Setup and Installation Sleepme+ Tips, Tricks & Best Practices Troubleshooting Frequently Asked Questions
  • Orders
  • Frequently Asked Questions
    Sleep Health and Wellness Terms of Service
  • Chilipad Cube
    Setup and Maintenance Frequently Asked Questions Troubleshooting Repair Guides
  • OOLER
    Setup and Maintenance OOLER App Frequently Asked Questions Troubleshooting
  • Accessories
    Weighted Blankets
+ More

Table of Contents

Chilipad Dock Pro Sleep System Monthly Maintenance Dock Pro Control Unit Chilipad Pro Mattress Topper Chilipad Dock Pro Semi-Annual System Flush (or as needed) Chilipad Pro Laundering Dock Pro Control Unit (while cleaning the Chilipad Pro) System Re-install

Chilipad Dock Pro Sleep System Monthly Maintenance

 

Dock Pro Control Unit

Expected Time: Less than 1 Minute
Supplies Needed: One System Cleaner Packet (per Dock Pro), Distilled Water, Clean Damp Cloth. 

  • Add one packet of System Cleaner to the reservoir and add distilled water as needed.

 

Pouring system cleaner in Chilipad Dock Pro

 

  • Wipe down the control unit with a clean damp cloth.

Note: Inspect the surfaces near the control unit (flooring, carpet, and furniture) for the presence of water, and ensure the surface is completely dry before reinstalling.
 

Chilipad Pro Mattress Topper

Note: When changing your sheets and/or at monthly intervals
Expected Time: Less than 1 Minute
 

  • Inspect the pad, protector, and mattress for signs of condensation (dampness, mold, discoloration, etc.).
  • If this should occur, drain, wash, and dry the pad as instructed in the ‘system flush section’.
  • Adjust the room temperature and Sleep System temperature settings to avoid condensation.

 

Chilipad Dock Pro Semi-Annual System Flush (or as needed)

Supplies Needed: One System Cleaner Packet & One Gallon Distilled Water (per Dock Pro), Clean Damp Cloth, Drain Key

 

Chilipad Pro Laundering

  • Disconnect the Chilipad Pro from the Hose Assembly.
  • Bring the pad to the tub or shower. Hang the pad over a towel rod or the shower rod/door to let gravity aid in draining the pad most efficiently.
  • Place the drain key in the pad’s connector(s) and drain all water from the pad. Remove drain key after water has been drained.
  • Wash the pad in cold water, gentle cycle. Dry completely on a medium-temperature setting. Note: Disable the washing machine’s heat sensor to expedite drying.
     

Note: Check the mattress for signs of condensation and be sure the pad, protector, and mattress are dry. For better mattress protection, we recommend using a waterproof mattress protector under the Chilipad Pro.
 

Dock Pro Control Unit (while cleaning the Chilipad Pro)

  • Remove the grille, wipe with a damp cloth, dry, and reinstall

 

Removing Chilipad Dock Pro Grille

 

  • Remove the reservoir and discard the water. Rinse and dry using a clean damp cloth. Return the reservoir to the Dock Pro control unit.
     

Note: Inspect the surfaces near the control unit (flooring, carpet, and furniture) for the presence of water, and ensure the surface is completely dry before reinstalling.
 

System Re-install

  • Confirm pad, mattress, and protector are completely dry.
  • Install the Chilipad Pro on top of the mattress protector and reconnect the hose to the pad.
  • Add One Packet of Chilipad System Cleaner to the water reservoir, Power On the system, and continuously refill the reservoir with approximately one gallon of distilled water until the water Icon disappears permanently.
  • Replace the reservoir lid and Power Off.

Your system is ready for use! Adding system cleaner monthly and using distilled water will keep your system operational and extend its life.

 

scheduled checks dock maintenance sleep system care chilipad upkeep maintenance frequency

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • Can the sleep environment affect the performance of the Dock Pro?
Products
Chilipad Dock ProChilipad CubeSleep Tracker by SleepmeChilipad Matress Protector
Resources
MindfulnessWellnessBlogDeveloper API
Company
About UsCareers
Info
AccessibilityWarrantyPatentsShipping & Returns
Work With Us
Partners & AffiliatesBulk Sales
Customer Support
Customer Service and Product Support Military and First Responder DiscountHSA/FSA Eligibility
Products
Chilipad Dock ProChilipad CubeSleep Tracker by SleepmeChilipad Matress Protector
Resources
MindfulnessWellnessBlogDeveloper API
Company
About UsCareers
Info
AccessibilityWarrantyPatentsShipping & Returns
Work With Us
Partners & AffiliatesBulk Sales
Customer Support
Customer Service and Product Support Military and First Responder DiscountHSA/FSA Eligibility
Sleepme
Link to the Sleepme Instagram account. Link to the Sleepme Twitter account. Link to the Sleepme YouTube account. Link to the Sleepme Facebook account.

© 2025 Sleep Solutions Inc. All Rights Reserved.
Privacy Policy |
Terms & Conditions |
California Privacy Rights and Notice at Collection |
Expand