If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Contact Support
  • Home
  • OOLER
  • Frequently Asked Questions

Why does the water droplet keep showing up on my unit's display screen?

Why water droplets appear on your unit's display screen and how to prevent potential damage.

Written by Denver Dublada

Updated at April 16th, 2025

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Chilipad Dock Pro
    Setup and Maintenance Troubleshooting Frequently Asked Questions Repair Guides
  • Sleepme Mobile App
    Setup and Installation Frequently Asked Questions Troubleshooting Hiber-AI
  • Sleep Tracker
    Setup and Installation Sleepme+ Tips, Tricks & Best Practices Troubleshooting Frequently Asked Questions
  • Orders
  • Frequently Asked Questions
    Sleep Health and Wellness Terms of Service
  • Chilipad Cube
    Setup and Maintenance Frequently Asked Questions Troubleshooting Repair Guides
  • OOLER
    Setup and Maintenance OOLER App Frequently Asked Questions Troubleshooting
  • Accessories
    Weighted Blankets
+ More

Table of Contents

Water Droplet icon on OOLER

Water Droplet icon on OOLER

If you notice that the water icon on your Cube or OOLER keeps indicating that the water level is low, you will want to check the unit for leaks. The system circulates water through a closed loop, however water evaporation will contribute to refills.

The most common areas where water can leak from a unit are from underneath the unit, through the vents on the sides and back, or from where the hose connects to the unit on the back. 

If you do not find an obvious leak we would suggest putting the unit on a baking sheet, rubber mat, or some other tray that would catch water. We would also advise checking the hose and pad/blanket to see if you can find any leaks.

If you complete these steps and still are unable to find any leaks, then you will want to confirm that the water in the unit's reservoir is touching the bottom of the threads that the cap screws in to. This should trigger the water icon to turn off, but if it doesn't you will want to screw the cap on and then moderately shake the unit up and down. It is possible that the float sensor in the unit is stuck and by shaking the unit you will be able to dislodge the sensor.  

 

Water Droplet icon on OOLER

 

 

 

water droplet display screen appearing repeated persistent

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • Why do I have to refill my system water? (Where does the water go?)
Products
Chilipad Dock ProChilipad CubeSleep Tracker by SleepmeChilipad Matress Protector
Resources
MindfulnessWellnessBlogDeveloper API
Company
About UsCareers
Info
AccessibilityWarrantyPatentsShipping & Returns
Work With Us
Partners & AffiliatesBulk Sales
Customer Support
Customer Service and Product Support Military and First Responder DiscountHSA/FSA Eligibility
Products
Chilipad Dock ProChilipad CubeSleep Tracker by SleepmeChilipad Matress Protector
Resources
MindfulnessWellnessBlogDeveloper API
Company
About UsCareers
Info
AccessibilityWarrantyPatentsShipping & Returns
Work With Us
Partners & AffiliatesBulk Sales
Customer Support
Customer Service and Product Support Military and First Responder DiscountHSA/FSA Eligibility
Sleepme
Link to the Sleepme Instagram account. Link to the Sleepme Twitter account. Link to the Sleepme YouTube account. Link to the Sleepme Facebook account.

© 2025 Sleep Solutions Inc. All Rights Reserved.
Privacy Policy |
Terms & Conditions |
California Privacy Rights and Notice at Collection |
Expand